Applications
Work Zone Lane Separator
Work Zone Lane Separator RAISED CURB SYSTEM
Because the QWICK KURB Work Zone Lane Separator System connects laterally as portable concrete barrier does, the system can be installed anchored, semi-anchored, or anchor-free.
L104 MEGA MARKER
QWICK KURB® Panel Markers can accept up to 224 square inches of reflective sheeting per side to achieve the highest level of night visibility. The Panel Marker connects to the curb base using the unique QWICK KURB two-part vertical rebounding flex boot support. This allows for installation of extra-tall 42 in. markers that can spring back to an upright position after impact.
L125SHM BIG BOLLARD
The QWICK KURB Big Bollard Marker is the largest reboundable bollard on the market with a 15” circumference. It addresses the need for high target multi-direction markers. In addition, the unique two-part vertical, with rebounding boot support, allows markers to remain upright in the most demanding environments.
Continuous Curbing
QWICK KURB Continuous Curbing is designed to interlock together similar to concrete barrier wall. A heavy duty hook is molded directly into the element to strengthen the system laterally. Anchors can also be added for long-term installations. The two-tier profile is designed to help keep curbing stationary during run overs. In addition, continuous curbing is only 10 5/8” wide so it easily fits within double yellow lines.
For long term operations, anchors an be easily installed to secure the system to asphalt, concrete and even grated bridge decks.
Interlocking Continuous Curb
Just like anchoring barrier wall, a secure connection between curbs is essential. Molding a heavy duty hook into the Continuous Longitudinal Channelizer strengthens the connection.
3.5 Inches High, No Vaulting
The unique two tier design of the QWICK KURB System allows the channelizing curb to be as tall as possible without vehicle vaulting.
On the bottom of each curb are molded rubber feet to raise the curb above the road surface to facilitate water run-off.
Anchor-Free Deployment
The combination of a smart two-tier design that can exert downward pressure during a run over and a lateral connection similar to portable concrete barrier, allows the QWICK KURB System to be installed anchored, semi-anchored or in certain circumstances, anchor-free.
Reboundable Boot
QWICK KURB Markers connect to the curb base using the unique QWICK KURB two-part vertical rebounding flex boot support. This allows for installation of extra-tall 42 inch markers that can spring back to an upright position after an impact.
